20 IPtables Examples For New SysAdmins

Linux comes with a host based firewall called Netfilter. According to the official project site:

netfilter is a set of hooks inside the Linux kernel that allows kernel modules to register callback functions with the network stack. A registered callback function is then called back for every packet that traverses the respective hook within the network stack.

This Linux based firewall is controlled by the program called iptables to handles filtering for IPv4, and ip6tables handles filtering for IPv6.

IPTABLES Rules Example

  • Most of the actions listed in this post are written with the assumption that they will be executed by the root user running the bash or any other modern shell. Do not type commands on remote system as it will disconnect your access.
  • For demonstration purpose I’ve used RHEL 6.x, but the following command should work with any modern Linux distro.
  • This is NOT a tutorial on how to set iptables.

#1: Displaying the Status of Your Firewall

Type the following command as root:
# iptables -L -n -v
Sample outputs:

Above output indicates that the firewall is not active. The following sample shows an active firewall:
# iptables -L -n -v
Sample outputs:

Where,

  • -L : List rules.
  • -v : Display detailed information. This option makes the list command show the interface name, the rule options, and the TOS masks. The packet and byte counters are also listed, with the suffix ‘K’, ‘M’ or ‘G’ for 1000, 1,000,000 and 1,000,000,000 multipliers respectively.
  • -n : Display IP address and port in numeric format. Do not use DNS to resolve names. This will speed up listing.

#1.1: To inspect firewall with line numbers, enter:

# iptables -n -L -v --line-numbers
Sample outputs:

You can use line numbers to delete or insert new rules into the firewall.

#1.2: To display INPUT or OUTPUT chain rules, enter:

# iptables -L INPUT -n -v
# iptables -L OUTPUT -n -v --line-numbers

#2: Stop / Start / Restart the Firewall

If you are using CentOS / RHEL / Fedora Linux, enter:
# service iptables stop
# service iptables start
# service iptables restart

You can use the iptables command itself to stop the firewall and delete all rules:
# iptables -F
# iptables -X
# iptables -t nat -F
# iptables -t nat -X
# iptables -t mangle -F
# iptables -t mangle -X
# iptables -P INPUT ACCEPT
# iptables -P OUTPUT ACCEPT
# iptables -P FORWARD ACCEPT

Where,

  • -F : Deleting (flushing) all the rules.
  • -X : Delete chain.
  • -t table_name : Select table (called nat or mangle) and delete/flush rules.
  • -P : Set the default policy (such as DROP, REJECT, or ACCEPT).

#3: Delete Firewall Rules

To display line number along with other information for existing rules, enter:
# iptables -L INPUT -n --line-numbers
# iptables -L OUTPUT -n --line-numbers
# iptables -L OUTPUT -n --line-numbers | less
# iptables -L OUTPUT -n --line-numbers | grep 202.54.1.1

You will get the list of IP. Look at the number on the left, then use number to delete it. For example delete line number 4, enter:
# iptables -D INPUT 4
OR find source IP 202.54.1.1 and delete from rule:
# iptables -D INPUT -s 202.54.1.1 -j DROP
Where,

  • -D : Delete one or more rules from the selected chain

#4: Insert Firewall Rules

To insert one or more rules in the selected chain as the given rule number use the following syntax. First find out line numbers, enter:
# iptables -L INPUT -n –line-numbers
Sample outputs:

To insert rule between 1 and 2, enter:
# iptables -I INPUT 2 -s 202.54.1.2 -j DROP
To view updated rules, enter:
# iptables -L INPUT -n --line-numbers
Sample outputs:

 

#5: Save Firewall Rules

To save firewall rules under CentOS / RHEL / Fedora Linux, enter:
# service iptables save
In this example, drop an IP and save firewall rules:
# iptables -A INPUT -s 202.5.4.1 -j DROP
# service iptables save

For all other distros use the iptables-save command:
# iptables-save > /root/my.active.firewall.rules
# cat /root/my.active.firewall.rules

#6: Restore Firewall Rules

To restore firewall rules form a file called /root/my.active.firewall.rules, enter:
# iptables-restore < /root/my.active.firewall.rules
To restore firewall rules under CentOS / RHEL / Fedora Linux, enter:
# service iptables restart

#7: Set the Default Firewall Policies

To drop all traffic:
# iptables -P INPUT DROP
# iptables -P OUTPUT DROP
# iptables -P FORWARD DROP
# iptables -L -v -n
#### you will not able to connect anywhere as all traffic is dropped ###

 

#7.1: Only Block Incoming Traffic

To drop all incoming / forwarded packets, but allow outgoing traffic, enter:
# iptables -P INPUT DROP
# iptables -P FORWARD DROP
# iptables -P OUTPUT ACCEPT
# iptables -A INPUT -m state --state NEW,ESTABLISHED -j ACCEPT
# iptables -L -v -n
### *** now ping and wget should work *** ###
# ping nixpal.com

 

#8:Drop Private Network Address On Public Interface

IP spoofing is nothing but to stop the following IPv4 address ranges for private networks on your public interfaces. Packets with non-routable source addresses should be rejected using the following syntax:
# iptables -A INPUT -i eth1 -s 192.168.0.0/24 -j DROP
# iptables -A INPUT -i eth1 -s 10.0.0.0/8 -j DROP

#8.1: IPv4 Address Ranges For Private Networks (make sure you block them on public interface)

  • 10.0.0.0/8 -j (A)
  • 172.16.0.0/12 (B)
  • 192.168.0.0/16 (C)
  • 224.0.0.0/4 (MULTICAST D)
  • 240.0.0.0/5 (E)
  • 127.0.0.0/8 (LOOPBACK)

#9: Blocking an IP Address (BLOCK IP)

To block an attackers ip address called 1.2.3.4, enter:
# iptables -A INPUT -s 1.2.3.4 -j DROP
# iptables -A INPUT -s 192.168.0.0/24 -j DROP

#10: Block Incoming Port Requests (BLOCK PORT)

To block all service requests on port 80, enter:
# iptables -A INPUT -p tcp --dport 80 -j DROP
# iptables -A INPUT -i eth1 -p tcp --dport 80 -j DROP

To block port 80 only for an ip address 1.2.3.4, enter:
# iptables -A INPUT -p tcp -s 1.2.3.4 --dport 80 -j DROP
# iptables -A INPUT -i eth1 -p tcp -s 192.168.1.0/24 --dport 80 -j DROP

#11: Block Outgoing IP Address

To block outgoing traffic to a particular host or domain such as nixpal.com, enter:
# host -t a nixpal.com
Sample outputs:

Note down its ip address and type the following to block all outgoing traffic to 5.16.13.6:
# iptables -A OUTPUT -d 75.126.153.206 -j DROP
You can use a subnet as follows:
# iptables -A OUTPUT -d 192.168.1.0/24 -j DROP
# iptables -A OUTPUT -o eth1 -d 192.168.1.0/24 -j DROP

#11.1: Example – Block Facebook.com Domain

First, find out all ip address of facebook.com, enter:
# host -t a www.facebook.com
Sample outputs:

Find CIDR for 69.171.228.40, enter:
# whois 69.171.228.40 | grep CIDR
Sample outputs:

To prevent outgoing access to www.facebook.com, enter:
# iptables -A OUTPUT -p tcp -d 69.171.224.0/19 -j DROP
You can also use domain name, enter:
# iptables -A OUTPUT -p tcp -d www.facebook.com -j DROP
# iptables -A OUTPUT -p tcp -d facebook.com -j DROP

From the iptables man page:

… specifying any name to be resolved with a remote query such as DNS (e.g., facebook.com is a really bad idea), a network IP address (with /mask), or a plain IP address …

#12: Log and Drop Packets

Type the following to log and block IP spoofing on public interface called eth1
# iptables -A INPUT -i eth1 -s 10.0.0.0/8 -j LOG --log-prefix "IP_SPOOF A: "
# iptables -A INPUT -i eth1 -s 10.0.0.0/8 -j DROP

By default everything is logged to /var/log/messages file.
# tail -f /var/log/messages
# grep --color 'IP SPOOF' /var/log/messages

#13: Log and Drop Packets with Limited Number of Log Entries

The -m limit module can limit the number of log entries created per time. This is used to prevent flooding your log file. To log and drop spoofing per 5 minutes, in bursts of at most 7 entries .
# iptables -A INPUT -i eth1 -s 10.0.0.0/8 -m limit --limit 5/m --limit-burst 7 -j LOG --log-prefix "IP_SPOOF A: "
# iptables -A INPUT -i eth1 -s 10.0.0.0/8 -j DROP

#14: Drop or Accept Traffic From Mac Address

Use the following syntax:
# iptables -A INPUT -m mac --mac-source 00:0F:EA:91:04:08 -j DROP
## *only accept traffic for TCP port # 8080 from mac 00:0F:EA:91:04:07 * ##
# iptables -A INPUT -p tcp --destination-port 22 -m mac --mac-source 00:0F:EA:91:04:07 -j ACCEPT

#15: Block or Allow ICMP Ping Request

Type the following command to block ICMP ping requests:
# iptables -A INPUT -p icmp --icmp-type echo-request -j DROP
# iptables -A INPUT -i eth1 -p icmp --icmp-type echo-request -j DROP

Ping responses can also be limited to certain networks or hosts:
# iptables -A INPUT -s 192.168.1.0/24 -p icmp --icmp-type echo-request -j ACCEPT
The following only accepts limited type of ICMP requests:
### ** assumed that default INPUT policy set to DROP ** #############
iptables -A INPUT -p icmp --icmp-type echo-reply -j ACCEPT
iptables -A INPUT -p icmp --icmp-type destination-unreachable -j ACCEPT
iptables -A INPUT -p icmp --icmp-type time-exceeded -j ACCEPT
## ** all our server to respond to pings ** ##
iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT

#16: Open Range of Ports

Use the following syntax to open a range of ports:
iptables -A INPUT -m state --state NEW -m tcp -p tcp --dport 7000:7010 -j ACCEPT

#17: Open Range of IP Addresses

Use the following syntax to open a range of IP address:
## only accept connection to tcp port 80 (Apache) if ip is between 192.168.1.100 and 192.168.1.200 ##
iptables -A INPUT -p tcp --destination-port 80 -m iprange --src-range 192.168.1.100-192.168.1.200 -j ACCEPT

## nat example ##
iptables -t nat -A POSTROUTING -j SNAT --to-source 192.168.1.20-192.168.1.25

#18: Established Connections and Restaring The Firewall

When you restart the iptables service it will drop established connections as it unload modules from the system under RHEL / Fedora / CentOS Linux. Edit, /etc/sysconfig/iptables-config and set IPTABLES_MODULES_UNLOAD as follows:

 

#19: Help Iptables Flooding My Server Screen

Use the crit log level to send messages to a log file instead of console:
iptables -A INPUT -s 1.2.3.4 -p tcp --destination-port 80 -j LOG --log-level crit

#20: Block or Open Common Ports

The following shows syntax for opening and closing common TCP and UDP ports:

 

#21: Restrict the Number of Parallel Connections To a Server Per Client IP

You can use connlimit module to put such restrictions. To allow 3 ssh connections per client host, enter:
# iptables -A INPUT -p tcp --syn --dport 22 -m connlimit --connlimit-above 3 -j REJECT

Set HTTP requests to 20:
# iptables -p tcp --syn --dport 80 -m connlimit --connlimit-above 20 --connlimit-mask 24 -j DROP
Where,

  1. –connlimit-above 3 : Match if the number of existing connections is above 3.
  2. –connlimit-mask 24 : Group hosts using the prefix length. For IPv4, this must be a number between (including) 0 and 32.

#22: HowTO: Use iptables Like a Pro

For more information about iptables, please see the manual page by typing man iptables from the command line:
$ man iptables
You can see the help using the following syntax too:
# iptables -h
To see help with specific commands and targets, enter:
# iptables -j DROP -h

#22.1: Testing Your Firewall

Find out if ports are open or not, enter:
# netstat -tulpn
Find out if tcp port 80 open or not, enter:
# netstat -tulpn | grep :80
If port 80 is not open, start the Apache, enter:
# service httpd start
Make sure iptables allowing access to the port 80:
# iptables -L INPUT -v -n | grep 80
Otherwise open port 80 using the iptables for all users:
# iptables -A INPUT -m state --state NEW -p tcp --dport 80 -j ACCEPT
# service iptables save

Use the telnet command to see if firewall allows to connect to port 80:
$ telnet nixpal.com 80
Sample outputs:

You can use nmap to probe your own server using the following syntax:
$ nmap -sS -p 80 nixpal.com
Sample outputs:

I also recommend you install and use sniffer such as tcpdupm and ngrep to test your firewall settings.

Conclusion:

This post only list basic rules for new Linux users. You can create and build more complex rules. This requires good understanding of TCP/IP, Linux kernel tuning via sysctl.conf, and good knowledge of your own setup. Stay tuned for next topics:

  • Stateful packet inspection.
  • Using connection tracking helpers.
  • Network address translation.
  • Layer 2 filtering.
  • Firewall testing tools.
  • Dealing with VPNs, DNS, Web, Proxy, and other protocols.
0 (0)
Article Rating (No Votes)
Rate this article
Attachments
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Full Name
Email Address
Security Code Security Code
Related Articles RSS Feed
How to deal with dmesg timestamps
Viewed 3315 times since Wed, Oct 3, 2018
LVM: Extend SWAP size by adding a new Logical Volume
Viewed 3072 times since Sat, Jun 2, 2018
How log rotation works with logrotate
Viewed 4805 times since Fri, Nov 30, 2018
Setting up encrypted tunnel using stunnel
Viewed 2359 times since Fri, Sep 28, 2018
How to configure an SSH proxy server with Squid
Viewed 2962 times since Sun, Dec 6, 2020
Linux Linux Network Statistics Tools / Commands
Viewed 9055 times since Mon, Sep 21, 2020
Use inotify-tools on CentOS 7 or RHEL 7 to watch files and directories for events
Viewed 13946 times since Fri, Jul 27, 2018
How to use yum-cron to automatically update RHEL/CentOS Linux
Viewed 2582 times since Wed, Oct 17, 2018
Netcat shell zabezpieczony hasłem
Viewed 2113 times since Thu, May 24, 2018
Find All Large Files On A Linux System
Viewed 2073 times since Mon, Oct 29, 2018